7SG11 Argus 8 Appendix
GENERAL INFORMATION
Relay Type :
Article Number :
Serial Number :
Date :
Station :
Circuit :
The following Setting Menu Tables are for SETTINGS GROUP G
SYSTEM CONFIGURATION MENU
SETTING RANGE SET VALUE
Active Settings Group G1-G8
Power System Frequency 50 / 60 Hz
Voltage Blocking Threshold 1V – 100V step 1V
Connection (3 pole versions)
3Ph-Ph
3Ph-N+NVD
2Ph-Ph+NVD
Connection (2 pole versions)
2Ph-Ph
Ph-N+NVD
Ph-Ph+NVD
2 Systems A/B
Ph VT Primary 000000 – 999999
Ph VT Secondary 40, 40.1…70.0, 70.5…150.0
3Vo VT Primary 000000 – 999999
3Vo VT Secondary 40, 40.1…70.0, 70.5…150.0
Set Identifier Up to 16 alphanumeric characters
Set Alarm 1 Up to 13 alphanumeric characters
Set Alarm 2 Up to 13 alphanumeric characters
Set Alarm 3 Up to 13 alphanumeric characters
Set Alarm 4 Up to 13 alphanumeric characters
Set Alarm 5 Up to 13 alphanumeric characters
Set Alarm 6 Up to 13 alphanumeric characters
Set Alarm 7 Up to 13 alphanumeric characters
Set Alarm 8 Up to 13 alphanumeric characters
Set Alarm 9 Up to 13 alphanumeric characters
Calendar – Set Date DD/MM/YY
Clock - Set Time HH:MM:SS
Clock Sync. From Status Seconds or Minutes
Default Screen Timer 10sec, 60sec, 5min, 1hour
Change Password 4 alphanumeric characters
VOLTAGE MENU (can be used also for SYSTEM A and SYSTEM B MENUS)
SETTING RANGE SET VALUE
Gn V Element 1 Operation OFF, O/V, U/V
Gn V Element 1 Setting OFF, 5V – 200V step 0.5V
©2011 Siemens Protection Devices Limited Chapter 9 Page 3 of 13
To Next Page
Loading...
