6 System Delivery Procedure
ACUSON S2000 US15-101.812.01.02.02 Siemens
05.10 Ultrasound
Page 6 of 40
Before You Start 1.1
This section applies to delivery personnel ONLY.
It will take approximately one hour to perform a courtesy check on the ultrasound system.
During the inspection and delivery process the tools needed include safety glasses, a utility
knife or a diagonal cutter, and a 9/16th inch socket wrench.
Delivery trucks with lift gates, and a two-person, uniformed team are required. Be sure to
unpack the system onsite at customer-designated locations. Talk with the shipping and
receiving manager to determine the desired locations, and perform a walk-through, while
the machine is still secured in your trailer, to verify the most direct route to the final delivery
location. Remember; DO NOT unpack the system inside the truck or on the lift gate. Once
you are in the delivery location, check to be sure that there is enough space to remove the
system from the shipping container.
To Next Page
Loading...
Need help?
General