Release 1.1
Technical Documentation
01/2006
TD_Repair_L1-L3_AX72_R1.1.pdf Page 14 of 41
8 GRT Software: Functionality Configuration
Step 1:
Select „Settings >> SWUP / JPICS”
Step 2:
Proceed as follows:
Select all required Variants you need to repair (click onto the “+” in
front of the product name.
Check Com-Port setting. If necessary change it
Check speed setting. Select always the lowest speed if your PC
does not have a fast serial card
Enter the value for “JPICS Server Timeout”. Be careful, this value
defines how long GRT tries to reach the server until you get an
error message. Do not select a very long time
To Next Page
Loading...
Need help?
General
