Siemens AX72 Service Manual

Release 1.1
Technical Documentation
01/2006
TD_Repair_L1-L3_AX72_R1.1.pdf Page 20 of 41
9.4 Case 3 Operator SWUpdate (blue)
Step 1: Carry out step 1 – 4 to start SW-Update.
1
3
Choose if customer data shall be erased.
If “Yes” activate the boxes in front of xfs
and mapping
4
Read out phone type/Variant.
>>Appears in the window
above.
2
Select the mobile phone CPU type
Start SW-Update
Remarks:
- The decision about a Siemens authorised SW-Update depends only on the
Master-Table.
- The user has no chance to influence the decision
- Xfs and mapping can be activated on demand. GRT will erase in any case
the customer data even if the action is cancelled.
-
If the user wants to download another variant then the automatically identified one, he
has simply to select another variant from the list. Afterwards he has to start the SW-
Update
Company Confidential
2006©BenQ

Siemens AX72 Specifications

General

Brand	Siemens
Model	AX72
Category	Cell Phone
Language	English