Siemens AX72 Service Manual

Release 1.1
Technical Documentation
01/2006
TD_Repair_L1-L3_AX72_R1.1.pdf Page 19 of 41
9.3 Case 2: Operator SWAP (red)
Step 1: Carry out step 1 – 4 to start SW-Update.
1
4
3
Read out phone type/Variant.
>>Appears in the window
above.
2
Select the mobile phone CPU type
Start SW-Update
Choose if customer data shall be erased.
If “Yes” activate the boxes in front of xfs
and mapping
Remarks:
- The decision about a Siemens authorised SW-Update depends only on the
Master-Table.
- The user has no chance to influence the decision
- Xfs and mapping are always activated there is no chance to deactivate them.
GRT will erase in any case the customer data even if the action is cancelled. If
the user wants to download another variant then the automatically identified
one, he has simply to select another variant from the list. Afterwards he has to
start the SW-Update
Company Confidential
2006©BenQ

Siemens AX72 Specifications

General

Brand	Siemens
Model	AX72
Category	Cell Phone
Language	English