Siemens Bently Nevada 3500 Proximitor User Manual

Siemens AG
Sector Industry, I&S IS ICS2 KHC
P.O.Box 3240
D-91050 Erlangen
E-Mail: ics2khc.industry@siemens.com
Maintenance / Trouble Shooting
Bentley Nevada 3500, Proximitor
This document has been prepared for the purpose of training. It is based on the
respective operation and maintenance manuals. Operation and maintenance must be
performed in accordance with the operating and maintenance manuals!

Siemens Bently Nevada 3500 Proximitor Specifications

General

Brand	Siemens
Model	Bently Nevada 3500 Proximitor
Category	Accessories
Language	English

Summary

Common maintenance procedures

Changing configuration

How to adjust setpoints using the 3500 Rack Configuration program.

Replacing modules

Procedures for replacing main and I/O modules, saving configuration, and wiring.

Verifying channels

Process for testing module channels for correct operation and replacing faulty modules.

Adjusting the Scale Factor and the Zero Position

Adjusting the Scale Factor

Step-by-step guide to scale factor adjustments using Rack Configuration Software.

Zero Position Adjustment Description

Explanation of zero position voltage adjustments and their relation to transducer ranges.

Adjusting the Zero Position

Procedure for adjusting the zero position voltage using Rack Configuration Software.

Troubleshooting

Self-test

Procedure for performing a self-test on Proximitor/Seismic Monitor modules.

LED Fault Conditions

Table mapping LED states to specific fault conditions and recommended solutions.

System Event List Messages

Guide to interpreting System Event List messages for troubleshooting.