Siemens C75 User Guide

27Calling
© Siemens AG 2003, \\Itl.eu\muc\Projekte_6\Siemens\ICM_MP_CCQ_S_UM_RUST\10210-001_vor-Ort-Einsatz\Produkte\C75_Aries\out-
Template: X75, Version 2.2; VAR Language: en; VAR issue date: 050718
right page (27) of C75 Aries, FUG, w/o ptt, 143mm, en, A31008-H6970-A1-2-7619 (23.09.2005, 12:10)
Call options
The following functions are only
available during a call:
§Options§ Open menu.
Direct call
If this is active, only one number can
be dialled.
Switch on
C
¢
T
¢Security
¢Direct call
C
Confirm selection.
J
Enter phone code.
When first prompted you define and
enter the phone code (4 - 8 digits).
C
Confirm selection.
Please do not forget this code (page 17)!
Ï
/
J
Select phone number
from the Phone-
book/Addressbook or
enter it.
C
Confirm.
Apply
§Carol§
To dial the phone number
(e.g. Carol’s phone num-
ber), press and hold the
right display key.
Switch off
#
Press down:
J
Enter phone code.
C Confirm input.
Hold
Maintain current call.
Microphone
on
If switched off, the person
on the other end of the line
cannot hear you (muting).
Also:
Press and hold
*
.
Handsfree
Call via the loudspeaker.
Volume
Adjust handset volume.
Default book
Phonebook/Addressbook.
Conference
(p. 26)
Time/charge
Display duration of call up
to now and (if set) the
charges incurred while the
call is in progress.
Send DTMF
Enter tone sequences
(numbers) for remote in-
quiries to an answering
machine.
Call trans-
fer=
Connect current call to a
second call. For you, both
calls are now ended.
Main menu
Access to the main menu.
Call status
List all held and active calls
(e.g. participants in a con-
ference).

Siemens C75 Specifications

General

Brand	Siemens
Model	C75
Category	Cell Phone
Language	English