Accessories
A WLAN stick needs to be connected to the product via the USB host interface during
commissioning with the Climatix Mobile application.
POL903.00/100
S55803-Y130-A100
NOTE: Accessories are not included with the unit and should be ordered separately.
* The document can be downloaded from http://siemens.com/bt/download by specifying the
product number as shown in the above table. Relevant data such as SSID, password for the
terminal unit and web interface for configuration can be found in the document.
Product Documentation
Product environmental declaration
All documentation can be downloaded at Siemens US Download Center.
Notes
Security
National safety regulations
Failure to comply with national safety regulations may result in personal injury and property
damage.
● Observe national provisions and comply with the appropriate safety regulations.
Mounting
The Economizer Controller can be mounted to sheet metal ductwork. When mounting, note
the following:
● Mount the controller in a position that allows clearance for wiring, servicing, and removal.
See Mounting Instructions for required mounting clearances.
● (For POL224.05) four spacers (M3.5 x L (L ≥10 mm) ) and four M3.5 screws are
required. Metal spacers are recommended.
● (For POL224.00) two No. 6 3/4” self-tapping screws are required.
● Siemens does not provide screws or spacers with the product. They must be obtained
separately.
To Next Page
Loading...
