14 K44 Duo Installation & User manual
ENG
Change codes
Enter A22.
Enter the current code. If it is a 4-digit code,
enter A after the last digit.
Enter the new code using four or six digits.
Enter the new code once again.
Choose whether or not the code should be disa-
bled from a time clock.
0 = no time control
1 = code disabled from time clock 1
2 = code disabled from time clock 2
Choose which relay output to control.
0 = both relay outputs
1 = relay output 1
2 = relay output 2
Change the next code by continuing from step 2
or press B to leave code program
1�
2�
3�
4�
5�
6�
7�
To Next Page
Loading...
