Siemens Codelock K44 Duo - Toggle function on;off

16 K44 Duo Installation & User manual
ENG
Buzzer on/off
This is how to deactivate the buzzer if sound on key-
presses and door opening is not desired. Note that
the buzzer will keep sounding during programming.
Enter A65.
Enter 0.
To reactivate the buzzer, press 1 in step 2 instead.
Toggle function on/off
To be able to unlock a door permanently, the toggle
function has to be activated.
Proceed as follows:
Enter A81.
Enter 1.
Choose what relay outputs the toggle function
should apply to.
0 = both
1 = relay output 1
2 = relay output 2
To deactivate the toggle function, follow the above
steps, only enter 0 in step 2 instead.
In the Unlock the door permanently section you will
find instructions on how to unlock the door perma-
nently.
1�
2�
1�
2�
3�