Siemens CP 1242-7 GPRS V2 User Manual

Configuration and operation
4.11 TeleService
CP 1242-7 GPRS V2
Operating Instructions, 10/2016, C79000-G8976-C311-02
87
4.11
TeleService
4.11.1
Configuration of the TeleService access
Configuration for using TeleService
To meet the requirements for using the TeleService functions for the CP, you need to make
the necessary settings at the following points in STEP 7.
"Communication types" parameter group of the CP
Select the following options:
● Enable telecontrol communication
● Activate online functions
TeleService server in "Mobile wireless communication settings" of the CP
You configure the following information in the parameter group "Mobile wireless
communications settings" of the CP:
● Address of the TeleService server
IP address or name of the telecontrol server that can be resolved by DNS or of the
TeleService gateway
● Port
Port number of the telecontrol server or the TeleService gateway
Users and roles in the global Security settings
1. Open the following page in the project tree:
Global security settings > User management
2. Role
Open the "Roles" tab
The two tables "Roles" and "Rights of the role" become visible.
If necessary open the "Roles view" if this is hidden by the "Rights of the role" table.
In the "Roles" table (at the top) create a new user-defined role for TeleService.

Siemens CP 1242-7 GPRS V2 Specifications

General

Brand	Siemens
Model	CP 1242-7 GPRS V2
Category	Controller
Language	English