Installation and connecting up
3.3 Connecting the CP
CP 1542SP-1, CP 1542SP-1 IRC, CP 1543SP-1
Operating Instructions, 01/2017, C79000-G8976-C426-03
37
The 2-terminal plug-in terminal block has the following pin assignment for the socket:
1M / 2M Ground
The two terminals 1L+/L2+ and 1M/2m of the terminal block are each bridged internally so
that you can connect either a single or a redundant power supply.
Connectable cable cross-section
● Without wire end ferrule 0.2 .. 2.5 mm
2
/ AWG 24 .. 13
● With wire end ferrule 0.25 .. 1.5 mm
2
/ AWG 24 .. 16
● With TWIN wire end ferrule: 0.5 .. 1.0 mm
2
/ AWG 20 .. 17
You will find information about the power consumption and further technical details of the
connectors in section Technical specifications (Page 109).
To Next Page
Loading...
Need help?
General
