Siemens CP 342-5 - B.2 On installing and commissioning the CP; B.3 On programming

References
B.2 On installing and commissioning the CP
CP 342-5 / CP 342-5 FO
48 Manual, 07/2017, C79000-G8976-C146-10
B.2
On installing and commissioning the CP
/2/
SIMATIC S7
Automation System S7-300
Operating Instructions
Siemens AG
● CPU 31xC and 31x Installation: Operating Instructions
On the Internet under the following entry ID:
Link: (https://support.industry.siemens.com/cs/ww/en/view/13008499)
● Module Data: Reference manual
On the Internet under the following entry ID:
Link: (https://support.industry.siemens.com/cs/ww/en/view/8859629)
/3/
SIMATIC NET
PROFIBUS Network Manual
Siemens AG
(SIMATIC NET Manual Collection)
Link: (https://support.industry.siemens.com/cs/ww/en/view/35222591)
B.3
On programming
/4/
SIMATIC NET
Program blocks for SIMATIC NET S7 CPs
Programming Manual
Siemens AG
Link: (https://support.industry.siemens.com/cs/ww/en/view/62543517)
/5/
SIMATIC
System and Standard Functions for S7-300/400 - Volume 1/2
Reference manual
Siemens AG
(Part of the STEP 7 documentation package STEP 7 Basic Knowledge)
(Part of the online documentation in STEP 7)
Link: (https://support.industry.siemens.com/cs/ww/en/view/1214574)