Performance and Functions
15
CP 5611 Installation Instructions/Product Information
A5E00102070–01
Hardware Requirements
The CP 5611 module is a plug and play network
adapter for devices with a 32–bit PCI bus
interface complying with the PCI V2.1
specification. The bus clock rate must not exceed
a maximum of 33 MHz. The module has the
dimensions of a short PCI module
(102 mm x 130 mm).
Note
For the DP mode, at least a 166 MHz Pentium
processor or comparable processor is recom-
mended.
Software Requirements
The software for operating the module is not
supplied with the product. You can order this from
your SIEMENS contact.
To Next Page
Loading...
