Settings for the Module
17
CP 5611 Installation Instructions/Product Information
A5E00102070–01
Settings for the Module
Important Rules (ESD Guidelines)
When handling and installing modules, keep to
the following rules (ESD Guidelines):
!
Warning
S Pick up components and modules only by
their edges.
S Do not touch the pins or conductors.
S Before opening the device, make sure that
you discharge any electrostatic charge from
your body. You can do this by touching metal
parts on the back panel of the device before
unplugging the power supply cable.
S Make sure that you also discharge any elec-
trostatic charge from tools you intend to use.
S Components and modules must only be in-
serted or removed when the power supply is
off.
S Do not operate the unit with the housing
open.
2
To Next Page
Loading...
Need help?
General
