Siemens DESIGO PX - Modifying and Adding Day Profile Entries; Initiating New Day Profile Entry

25/34
Siemens Building Technologies PXM10 operator unit CM110397en
Siemens Building Automation 31.08.2004
Step Procedure
3
Click OK to open the input window
Figure 6-5 Input fields for the day profile
4
Rotate the dial to set the required time and switch
status. Move to the next input field by pressing OK
in each case.
5
Finally, confirm the inputs with OK.
6.1.2 Adding a new entry
Step Procedure
1 Highlight the Day Profile option and click OK to
open it
Figure 6-6
2
Highlight the required day and open it with OK.
Figure 6-7