Siemens EQ500 integral TQ51 Series - 10 Cup Heater; 11 Basic Settings; 11.1 Changing Basic Settings; 11.2 Overview of Basic Settings

en Cup heater
56
10 Cup heater
1
You can use the cup heater to pre-
heat your cups.
10.1 Activating and deactivat-
ing the cup heater
1
WARNING
Risk of burns!
The cup heater
1
can become very
hot.
▶ Never touch the cup heater
1
while
hot.
▶ Allow the hot cup heater
1
to cool
down before touching it.
Tip:Place the cups with their base
on the cup heater to warm them to
optimum effect
1
.
▶ You can activate or deactivate the
cup heater
1
in the basic settings.
11 Basic settings
You can configure the basic settings
for your appliance to meet your
needs and call up additional func-
tions.
11.1 Changing the basic set-
tings
1. Press ⁠.
2. Use or to select the desired
basic setting and press ⁠.
a The display will show the setting
options and the navigation sym-
bols will light up. The display indic-
ates the current setting.
3. Use or to make the desired
selection and press ⁠.
a The setting is now saved.
4. Use to go back.
5. Press to exit the menu.
1
Depending on the appliance specifications