Connection to input/output module
Interface Function
'GPI' Possible to reset an alarm or the status of the aspirating
smoke detector using the fire control panel
'Fault' A general fault is indicated on the fire control panel
'Inspect 1' An early warning is indicated on the fire control panel
'Prealarm' A pre-alarm is indicated on the fire control panel
'Fire 1' An alarm is indicated on the fire control panel
No external extinguishing equipment can be controlled with this connection
variant.
32
Building Technologies A6V10345654_h_en_--
Fire Safety 2015-05-29
To Next Page
Loading...
