Building Technologies A6V10334410_h_en_--
Fire Safety 2015-09-29
1 About this document
Goal and purpose
This document contains all the information you'll need about the following
aspirating smoke detectors:
FDA241
FDA221
Following the instructions consistently will ensure that the product can be used
safely and without any problems.
Intended use
Aspirating smoke detectors FDA241 and FDA221 may only be used for fire
detection and fire control purposes.
Target groups
The information in this document is intended for the following target groups:
Product Manager Is responsible for information passing
between the manufacturer and regional
company.
Coordinates the flow of information
between the individual groups of people
involved in a project.
Has obtained suitable specialist training
for the function and for the products.
Has attended the training courses for
Product Managers.
Project Manager Coordinates the deployment of all
persons and resources involved in the
project according to schedule.
Provides the information required to run
the project.
Has obtained suitable specialist training
for the function and for the products.
Has attended the training courses for
Project Managers.
Project engineer Sets parameters for product depending
on specific national and/or customer
requirements.
Checks operability and approves the
product for commissioning at the place
of installation.
Is responsible for trouble-shooting.
Has obtained suitable specialist training
for the function and for the products.
Has attended the training courses for
Product Engineer.
Installation personnel Assembles and installs the product
components at the place of installation.
Carries out a performance check
following installation.
Has received specialist training in the
area of building installation technology
or electrical installations.
Commissioning personnel Configure the product at the place of
installation according to customer-
specific requirements.
Check the product operability and
release the product for use by the
operator.
Searches for and corrects malfunctions.
Has obtained suitable specialist training
for the function and for the products.
Has attended the training courses for
commissioning personnel.
Maintenance personnel Carries out all maintenance work.
Checks that the products are in perfect
working order.
Searches for and corrects malfunctions.
Has obtained suitable specialist training
for the function and for the products.