Siemens FDL241-9 - Installing the detector unit

Commissioning
Installing the detector unit
6
65
Building Technologies
007016_i_en_--
Fire Safety 2012-09-07
6.2 Installing the detector unit
WARNING
Danger of falling
Bodily injury
● When installing, use a secured ladder or work platform.
 The terminal block is installed in the detector base.
1. Insert the detector unit (1) in the base with the terminal block (2) with the LED
pointing downwards.
2. Fasten the detector unit with four screws (3). Ensure that the screws are
tightened.
1
2
3
Installing the detector unit
1 Detector unit 3 Screws
2 Detector base with terminal block