Siemens FLENDER H1SH - Taconite Seal

31 / 96
BA 5030 en 02/2013
5.7.2 Taconite seal
Taconite seals were specially developed for use in a dusty environment. The
penetration of dust is prevented by a combination of three seal elements (radial
shaftsealing ring, lamellar seal and greasecharged labyrinth seal).
1
2
3
4
Fig. 17: Taconite seal
1 Radial shaftsealing ring 3 Greasecharged labyrinth seal, rechargeable
2 Lamellar seal 4 Flat grease nipple AM10x1 to DIN 3404
Taconite seals are divided into the following types:
1
2
3
1
4
Taconite "F‐F" and "F‐H" Taconite "F‐K"
Taconite "E" Taconite "F"
Fig. 18: Taconite seal, variants E, F, FF, FH and FK
1 Output 3 Taconite "FH"
2 Taconite "FF" 4 Taconite "FK"