WARNING
Standing under suspended loads
If the lifting gear or load suspension devices were to fail, the transportation unit / cabinet could
fall. Death, serious injury, or material damage can result.
Do not stand underneath or near to a raised load.
Observe the following for a safe transport:
● When using a crane to transport the equipment, keep to the permissible lifting capacity.
Carefully observe the center of gravity.
● If the cabinet center of gravity is off-center, use suitable and undamaged suspension
equipment, e.g. a cross beam. The lifting beam reduces the pressure on the device and
prevents damage.
● If the cabinet has eye hooks, use them. In such cases, do not use any lifting rods.
4.5.11 Using lifting rods
4.5.11.1 Force absorption
During transportation with a crane, force is absorbed by the supporting frame of the cabinet.
The supporting frame remains on the unit. The device is mounted at the installation site via
the supporting frame.
4.5.11.2 Using lifting rods
WARNING
Inadequately dimensioned lifting rods
Inadequately dimensioned lifting rods are liable to bend or break. The converter could drop
off the crane as a result, This can result in death, serious injury or material damage.
Use suitable lifting rods for transporting. The weight of the cabinet is indicated on the rating
plate.
NOTICE
Improper lifting
If the transport unit is lifted incorrectly, this can damage the decorative trim, cabinet doors,
or fans.
Protect the cabinet and protruding parts against damage.
Always lift the transport units with the appropriate spreading devices or hoisting tackle.
Preparing for Use
4.5 Transportation
SINAMICS PERFECT HARMONY GH180 6SR41 manufactured in NMA Nuernberg, Germany
Operating Instructions Rev.201706301306 73
To Next Page