4.7 Off-Loading
4.7.1 Off-Loading
Due to the size and weight of the SINAMICS PERFECT HARMONY GH180 components, it is
important to carefully plan all handling operations when off-loading equipment. Siemens
recommends that prior considerations be made for ceiling heights, door widths, and ease of
installation in advance of receipt of equipment.
Off-loading from the truck is often the most critical operation because of the limited access.
Advance planning and coordination among the manufacturer, the carrier, the installation
contractor, and the owner are vital.
Prior to Moving the Unit
Before moving the unit, verify the following:
● The unit doors are closed/installed
● The unit is in an upright position
● The unit is stabilized to prevent tilting
● Each cell’s locking latches are tie-wrapped in an upright position
Preparing for Use
4.7 Off-Loading
SINAMICS PERFECT HARMONY GH180 6SR41 manufactured in NMA Nuernberg, Germany
Operating Instructions Rev.201706301306 77
To Next Page
Loading...
Need help?
General
