9
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-50-
3000Cla.fm
02.03.00
Registering the handset
You must register your handset at the base station before
you can start to make calls.
Step 1
• First prepare the
Siemens base station
for registration:
Step 2
• You now have
one minute
to enter the following at the
handset
:
z { ~ Press the keys shown.
¸b Enter the base station number, e.g.
¸
(sta-
tion 1-4) and confirm.
System PIN
b Enter the base station’s system PIN and con-
firm (factory setting: 0000) – the unassigned
call numbers appear after a few seconds.
e.g. s Enter the desired call number – the
statio-
nary
base icon
is displayed.
Your handset is ready for operation!
Gigaset Base station preparation
3010/pocket
3015
Hold down the coloured base station key for
approx. 10 seconds
until you hear signal
tones
.
3020, 3025
3030, 3035
In the base station menu select registration
option and confirm.
ISDN
models
Press the display (LED) –
flashing during registration.
1000/2000
models
As for relevant successor model.
– Please refer to the relevant operating instructions (step 1)
to register at
non-Siemens base stations
.
– You can register your Gigaset 3000 Classic handset at
up to 4 different base stations
, see above.
3000Cla-IM1-50-en.bk Seite 9 Donnerstag, 2. März 2000 12:51 12
To Next Page
Loading...
