Siemens Gigaset 3000 Classic - Beeps and display

17
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-50-
3000Cla.fm
02.03.00
Activating/deactivating beeps
•
Confirmation beeps
– function code
13
(both beeps)
– Confirmation beep (1 beep) when you conclude a
function and replace the unit in the charging unit
– Error beep (4 short beeps) when you make an incorrect
entry
•
Key beep
– function code
14
– every keystroke is confirmed
•
Battery warning beep
– function code
15
– when the battery is empty
You can also activate the battery warning beep for call
status only = enter
2
.
z
Press the set key.
e.g.
¸ ub
For example, enter function code 14 and
confirm.
e.g.
¨
For example, deactivate the key beep.
Deactivate =
0
; activate =
1
b
Save the entry.
Activating/deactivating base station display
The current base station is displayed when the handset is
idle.
z
Press the set key.
¸  b
Activate the function.
e.g. ¸
For example, activate the display.
Activate =
1
; deactivate =
0
b
Save the setting.
3000Cla-IM1-50-en.bk Seite 17 Donnerstag, 2. März 2000 12:51 12