7
Gigaset 3000 Classic, IM1-En, A31008-G3000-B001-50-
3000Cla.fm
02.03.00
Charging the batteries
The batteries supplied are
not
charged
.
To charge the batteries, insert the handset in the base sta-
tion or Gigaset 3000L charging unit (accessory) – you will
hear the confirmation beep. The charging status icon flashes
on the handset display to indicate that a charging operation
is in progress:
Approved batteries:
Always replace both batteries and only use batteries of the
same type/from the same manufacturer.
§
Batteries empty
¥
Batteries
2
/
3
charged
¦
Batteries
1
/
3
charged
¤
Batteries full
– We recommend initially charging the batteries for at least
16 hours without interruption – irrespective of the
charging status icon.
– Once the first charging operation is complete, you can
replace the handset in the base station after every call.
Charging is controlled electronically. This ensures opti-
mum charging and prolongs battery life.
– The batteries heat up during charging.
– The battery charging status is only displayed correctly
after uninterrupted charging/discharging. You should
therefore avoid opening the battery compartment unne-
cessarily.
Nickel-Cadmium (NiCd) Nickel-Metall-Hydrid (NiMH)
Sanyo N-3U (700 mAh) Saft VHAAH 1300 (1300 mAh)
Mobile Power 700 (700 mAh) Panasonic HHR-110 AA (1100 mAh)
Panasonic P-60AA DT
(600 mAh)
Friwo NiMH (1400 mAh)
Varta 751 RS (700 mAh) Sanyo H-3 U (1500 mAh)
GP GP60AAKC (600 mAh) Toshiba TH-1200 AARE (1200 mAh)
GP GP130 AAHC (1300 mAh)
GP GP150 AAHC (1500 mAh)
3000Cla-IM1-50-en.bk Seite 7 Donnerstag, 2. März 2000 12:51 12
To Next Page
Loading...
