Siemens Gigaset A 200 - Using the Directory and Other Lists; Directory and Network Access List

24
Using the directory and other lists
Gigaset A200 / englisch / A31008-A200-B101-1-7619 / Directories.fm / 16.01.2003
Using the directory and other lists
Directory and network access list
Both lists are used in the same way, except that the h key is pressed to open the direc-
tory and the C key to open the network access list.
You can save up to 20 phone numbers and names in the directory
h. This makes dial-
ling easier.
You can save up to 10 prefix numbers from phone companies (call-by-call) in the net-
work access list
C, for cost-effective calling (page 31).
Maximum number of characters per entry
Save phone number in directory network access list
◆ Directory entry 22 characters
◆ Network access list entry 12 characters
or
Open directory or network access list.
[_______________]
MENU
Press display key to open menu.
[__________] [______________________________________________] [__________]
NEW ENTRY OK
Select and confirm.
[_____ _]OK
Enter phone number and confirm.
[_____ _]
OK
Enter name (max. 12 characters)
(Text entry page 25) and confirm.
Long press (return to idle mode).
i
If your phone is connected to a PABX that requires a prefix (e.g. "0") for an
outside line, then you must save this prefix number as the first digit in all
your directory entries.