Siemens Gigaset A 200 - Step 1: Connecting the Base Station

6
Making the phone ready for service
Gigaset A200 / englisch / A31008-A200-B101-1-7619 / starting.fm / 16.01.2003
Step 1: Connecting the base station
First connect your base station to the mains supply and the telephone socket.
Underneath the base station
Power supply unit
(220/230V)
with power cable
◆ Insert small power cable plug into the socket under the base station.
◆ Lay the cable correctly in the cable channel.
◆ Plug the power supply unit into the power socket.
Telephone jack with
telephone cable
Cable channels
◆ small coloured plug on the telephone cable into the socket (clicks in).
◆ Lay the cable correctly in the cable channel.
◆ Plug the phone into the phone socket.
2. 1.
1.
2.
i
◆ Use only the power supply unit supplied.
◆ If you buy another phone cable, ensure that it has the right connector
assignment for your country.
◆ To keep your phone operational, the power supply unit must always
remain plugged in.