Siemens Gigaset A 200 - Activate;Deactivate Ringer; Activate;Deactivate Battery Warning Tone; Return Handset to Factory Settings

40
Handset settings
Gigaset A200 / englisch / A31008-A200-B101-1-7619 / settings_bs_hs.fm / 16.01.2003
Activate/deactivate ringer
All handsets ring to indicate an incoming external call. You can deactivate the ringer on
your handset permanently or just for the current call. This can be done in the idle status
or during an incoming call before it is accepted.
Activate/deactivate battery warning tone
With the function activated (default setting: on) you will be informed by an acoustic sig-
nal that the battery is almost flat.
Return handset to factory settings
You can return individual settings and changes to the original factory (default) settings.
Entries in the directory, the caller list and network access list as well as registration of
the handset with the base station remain unchanged.
Deactivating the ringer permanently:
Press the star key until the ringer can no longer be
heard. The ringer is now permanently switched off.
The symbol
Ú appears in the display.
Reactivating the ringer:
Hold down the star key in idle mode or during an
incoming call before it is accepted.
i
To deactivate the ringer for the current call, open the MENU and
confirm SILENT with OK.
[_______________]
MENU
Press display key to open menu.
either ...
Deactivate battery warning:
Press keys
O 4 Q.
or ...
Activate battery warning:
Press keys
O 4 1.
[_______________]
MENU
Press display key to open menu.
Use the keys O I to call up the procedure.
[______________________________________________] [__________]
RESET ? OK
Confirm safety check.