Siemens Gigaset A 200 - Page 28

26
Using the directory and other lists
Gigaset A200 / englisch / A31008-A200-B101-1-7619 / Directories.fm / 16.01.2003
Dialling with the network access list (call-by-call)
With this function the prefix for a network operator can be inserted in front of a phone
number ("chained").
Speed dialling (call-by-call) from the network access list
You can save eight numbers (2-9) in the network access list for speed dialling. To do so
you must insert the number for speed dialling in front of the name of the network oper-
ator.
Example: Enter 2 and then the name of the network operator.
Open network access list.
[______ ___] [________ _____ _]
MENU
Select entry and press display key.
[______________________________________________] [__________]
EDIT ENTRY OK
Confirm.
either ...
Key in phone number:
Enter phone number.
or ...
Select phone number from the directory:
Open directory.
[______ ___] [_____]
OK
Select phone number and confirm.
... then
Press the talk key. The number is dialled.
Open network access list.
[______ ___] [________ _____ _]
MENU
Select entry and press display key.
[__________] [______________________________________________] [__________]SHOW ENTRY OK
Select and confirm.
[___________]
OK
Confirm.
[___________]
u
Move the cursor to the first position in the name
field.
Enter speed dialling number, e.g. 2 (press 4 times)
[___________]
OK
Confirm.
i
When saving a new entry simply enter the speed dial number as the first
digit.