12
First steps
Gigaset C590 / IM-NORD EN / A31008-M2101-R201-1-SM19 / starting.fm / 29.06.2009
Version 4, 16.09.2005
Attaching the belt clip
The handset has notches on each side to attach the belt clip.
¤ To attach – press the belt clip
onto the back of the handset so
that the protrusions on the belt
clip engage with the notches.
¤ To remove – using your right
thumb apply pressure to the
centre of the belt clip, push the
fingernail of your left index fin-
ger between the clip and the
casing and lift the clip upwards.
Placing the handset in the base/charging cradle
¤ Place the handset in the base/charging cradle with its display facing
forward.
Each handset is registered with the base at the factory. You do not need to com-
plete a registration. If you wish to use your handset with a different base or use
further handsets with your base, you will have to register the handset manually
¢ page 48.
To charge the batteries, leave the handset in the base/charging cradle.
Please note
Only place the handset in the base/charging cradle that is intended for it.
To Next Page
Loading...
