Siemens Gigaset E365 User Manual

33
Handset settings
Gigaset E365 / AUS / A31008-M1806-C401-1-7619 / T-NetBox_SAG-registration.fm / 10.11.2008
Version 4, 16.09.2005
Adjusting the loudspeaker
volume
You can set the loudspeaker volume for
handsfree talking and the earpiece vol-
ume to five different levels (1–5;
e.g. volume 2 = ˆ).
§Menu§ ¢ Audio Settings ¢ §OK§ ¢ Handset
Volume / Handsfree Volume
¢ §OK§
q Adjust the volume and
press
§OK§.
Adjust the volume during a call:
t Press the control key.
q Adjust the volume and
press
§OK§.
Changing ringtones
u Volume:
Five volume levels
(1-5;e.g.volume2= ˆ) and "off"
(volume 0 =
Ú
‰ ).
u Melody:
List of pre-loaded ringer melodies. The
first three melodies are the "classical"
ring tones.
You can also set different melodies for the
following functions:
u External Calls: For external calls
u Internal Calls: For internal calls
u Alarm Clock: For the alarm clock
For how to set the ringtones for the base
station, see page 35.
Setting ringer volume
The ringer volume is the same for all types
of signalling.
§Menu§ ¢ Audio Settings ¢ §OK§ ¢ Ringer
Volume
¢ §OK§ ¢ q (Adjust volume)
¢ §OK§
Or in idle status:
t Press briefly ¢ q (Adjust volume)
¢ §OK§
Setting ringer melody
Set different ringer melodies for external
calls, internal calls and the alarm clock.
§§Menu§ ¢ Audio Settings ¢ §OK§ ¢ Ringer
Melody
¢ §OK§ ¢ External Calls /
Internal Calls / Alarm Clock
¢ §OK§
¢ q (Select melody)
¢ §OK§ (‰ =on)
Activating/deactivation
suppression of the first ringtone
The phone identifies an incoming SMS
from the first network signal.
§Menu§ ¢ LNO25
¢ Enter digits: Q = make first
ringtone audible;
1 = suppress first
ringtone
¢ §OK§
Please remember:
If first ringtone muting is deactivated,
then every incoming SMS will be signalled
by a ringtone. If you take this type of "call"
at the first ringtone, you will lose the SMS.
Advisory tones
Your handset uses ‘advisory tones’ to tell
you about different activities and statuses.
The following tones can be activated and
deactivated independently of each other:
u Advisory tones:
– Key click: Each key press is
acknowledged.
– Confirmation tone (rising tone
sequence): at the end of an entry/
setting, when the handset is placed
in the base station and on arrival of
an SMS or a new entry in the
answering machine list or the calls
list.
– Error tone (descending tone
sequence): when you make an
incorrect entry.
– Menu end tone: when scrolling at
the end of a menu.

Siemens Gigaset E365 Specifications

General

Brand	Siemens
Model	Gigaset E365
Category	Telephone
Language	English