Siemens Gigaset S455 - Network Services; Setting Functions for the Next Call; Setting Functions for All Subsequent Calls; Functions During a Call

16
Network services
Gigaset S455 AM / GBR / A31008-M1714-L101-1-7619 / TNet_Features_SAG.fm / 31.08.2006
Network services
Network services are functions that your
network provider makes available to you.
You have to request these services from
your network provider.
¤ If you require assistance, please con-
tact your network provider.
Setting functions for the
next call
Withhold No.
Withhold Calling Line Identification for
the next call (CLIR).
v
¢ ê ¢ Withhold No.
~ Enter number.
c Press talk key.
Setting functions for all
subsequent calls
If you have completed one of the follow-
ing procedures, a code is sent.
¤ After confirmation from the telephone
network, press the end call key a.
You can set the following features:
General call diversion
v ¢ ê ¢ All Calls ¢ Call Divert
¤ Change multiple line input:
When:
All Calls / No Answer / When Busy dialling.
Call No.:
Press the display key
§Edit§. Enter number
to which call is to be diverted, and press
Save Entry §OK§.
Status:
Activating/deactivating call diversion.
¤ Press the display key §Send§.
Activating/deactivating call waiting
v ¢ ê ¢ All Calls ¢ Call Waiting
Status: Activating/deactivating.
§Send§ Press the display key.
Functions during a call
Initiating callback
You hear the busy tone.
§Options§ ¢ Ringback
a Press the end call key.
Consultation
During a call:
§Ext.Call§ Press the display key.
~ Enter number.
You have the following options:
u Toggling:
¤ Use q to toggle between the par-
ticipants.
u End call with both participants:
¤ Press the end call key a.
Accepting a waiting call
§Accept§ Press the display key.
You have the option of toggling or holding
a conference call.
Accept call waiting
§Options§ £ Accept waiting call
Functions after a call
Cancelling callback
v ¢ ê ¢ Ringback Off
Please note:
Without CLIP a waiting call is only announced
with a beep.