Siemens Gigaset S455 - Making Internal Calls

38
Using several handsets
Gigaset S455 AM / GBR / A31008-M1714-L101-1-7619 / registr_sett.fm / 31.08.2006
Registering other handsets
You can register other Gigaset handsets
and handsets for other devices with GAP
functionality as follows.
On the handset
¤ Start to register the handset as
described in its user guide.
On the base station
¤ Press and hold the registration/paging
key on the base station (page 2)
(approx. 3 secs.).
De-registering handsets
You can de-register any registered handset
from any registered Gigaset S45 handset.
u Open list of internal users.
The handset you are currently
using is indicated by < .
s Select the internal user you
wish to de-register.
§Options§ Open menu.
De-reg. H/Set No.
Select and press
§OK§.
~ Enter current System PIN and
press
§OK§.
§Yes§ Press the display key.
Locating a handset ("paging")
You can locate your handset using the
base station.
¤ Press the registration/paging key on the
base station briefly.
¤ All handsets will ring at the same time
("paging"), even if the ringers are
switched off.
Ending paging
¤ Briefly press the registration/paging
key on the base station or press the talk
key c on the handset.
Changing the base station
If your handset is registered to more than
one base station, you can set it to a partic-
ular base station or to the base station
that has the best reception (Best Base).
v
¢ Ð ¢ Handset ¢ Select Base
s Select one of the registered
base stations or Best Base and
press
§OK§.
Making internal calls
Internal calls to other handsets registered
on the same base station are free.
Calling a specific handset
u Initiate internal call.
~ Enter the number of the hand-
set.
Or:
u Initiate internal call.
s Select handset.
c Press the talk key.
Calling all handsets ("group call")
u Initiate internal call.
* Press the star key. All handsets
are called.
Ending a call
a Press the end call key.
Transferring a call to another handset
You can transfer an external call to
another handset (connect).
u Open list of handsets.
The external caller hears the
wait melody if activated (see
page 46).
s Select a handset or Call All and
press
§OK§.
When the internal participant answers:
¤ If necessary announce the external call.
a Press the end call key.