46
Base station settings
Gigaset S455 AM / GBR / A31008-M1714-L101-1-7619 / registr_sett.fm / 31.08.2006
Base station settings
The base station settings are carried out
using a registered Gigaset S45 handset.
Protecting against unauthorised
access
Protect the system settings of the base sta-
tion with a PIN known only to yourself.
The system PIN must now be entered
when, for example, registering/de-regis-
tering a handset to/from the base station
or when restoring the default settings.
Changing the system PIN
You can change the 4-digit system PIN set
on the base station (default setting: 0000)
to a 4-digit PIN known only to yourself.
Setting a system PIN facilitates remote
operation of the answering machine
(page 34).
v
¢ Ð ¢ Base ¢ System PIN
~ Enter current System PIN and
press
§OK§.
~ Enter new system PIN. For
security the PIN is shown as
four stars (
****
).
s~ Scroll to the next line, re-enter
new system PIN and press
§OK§.
a Press and hold (idle status).
Changing ringtones
u Volume:
You can choose between five volumes
and the "crescendo" ring, see page 43.
Select "0" to deactivate the ringtone of
the base station.
u Ringtones:
You can set a ringtone melody for
external calls, see page 43.
v
¢ Ð ¢ Base ¢ Ringer Settings
For how to adjust the settings, see
page 43.
Activating/deactivating the
wait melody
v ¢ Ð ¢ Base ¢ Music on hold
Press §OK§ to activate or deactivate the wait
melody ( = on).
Repeater support
With a repeater you can increase the range
and reception strength of your base sta-
tion. First you must activate the repeater
mode. This will terminate any calls cur-
rently running through the base station.
Requirement: A repeater is registered.
v
¢ Ð ¢ Base ¢ Add. Features
¢ Repeater Mode
§Yes§ Press the display key.
When repeater mode is active, the menu
item is marked with .
Caution:
Memorise the new system PIN well! If you for-
get it, the phone will require specialist atten-
tion. If this happens, contact the Siemens Hot-
line (page 50).
‰
‰
To Next Page
Loading...
