Siemens HB573AB 0 Series - Childproof Lock; Activating and Deactivating the Childproof Lock

en Childproof lock
14
11 Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
Note:You can go to the basic settings →Page14 to
specify whether you want the option to set the child-
proof lock.
11.1 Activating and deactivating the
childproof lock
Requirement:The function selector must be set to the
"Off" position ⁠.
▶
To activate the childproof lock, press and hold the
button until appears in the display.
‒ To deactivate the childproof lock, press and hold
the button until goes out in the display.
12 Basic settings
You can configure the basic settings for your appliance to meet your needs.
12.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display Basic setting Selection
Signal duration upon completion of a time or
timer period
= 10 seconds
= 30 seconds
1
= 2 minutes
⁠ ⁠ Waiting time until a setting is applied = 3 seconds
1
= 6 seconds
= 10 seconds
⁠ ⁠ Button tone when pressing a button = off
= on
1
⁠ Brightness of the display illumination = dark
= medium
1
= bright
⁠ Time display = hide the time
= display the time
1
⁠ Childproof lock can be adjusted = no
= yes
1
= yes, with locked door
⁠ Interior lighting during operation = no
= yes
1
⁠ Cooling fan run-on time = short
= medium
1
= long
= extra-long
⁠ Telescopic shelves retrofitted
2
= no
1
(for rails and 1-level pull-out)
= yes (for 2- and 3-level pull-out)
Reset all values to factory settings = no
1
= yes
1
Factory setting (may vary according to model)
2
Depending on the appliance specifications
12.2 Changing basic settings
Requirement:The appliance is switched off.
1.
Press and hold the button for approximately
fourseconds.
a The first basic setting appears in the display,
e.g. ⁠ ⁠ ⁠.
2.
Use the or button to change the setting.
3.
Use the button to switch to the next basic setting.
4.
To save the changes, press and hold the button
for approx. fourseconds.
Note:Your changes to the basic settings will be re-
tained even after a power failure.