en Before using for the first time
12
--------
KBefore using for the first
time
Bef or e usi ng f or t he f i r st time
Before you can use your new appliance, you must
make some settings. You must also clean the cooking
compartment and accessories.
Initial use
After connecting the appliance to the power or following
a power cut, the settings for initial use are shown in the
display.
Note: You can change these settings at any time in the
basic settings. ~ "Basic settings" on page 15
Setting the language
"German" is the preset language.
1. Use the rotary selector to select the required
language.
2. Touch the ¿ arrow.
The next setting appears.
Setting the time
The time starts at "12:00".
1. Turn the rotary selector to set the current time.
2. Touch the ¿ arrow
Setting the date
The default date is "01.01.2014".
1. Use the rotary selector to set the current day, month
and year.
2. Touch the ¿ arrow to confirm.
A note appears in the display confirming that the
initial use has been completed.
Cleaning the cooking compartment and
accessories
Before using the appliance to prepare food for the first
time, you must clean the cooking compartment and
accessories.
Cleaning the cooking compartment
To remove the new-appliance smell, heat up the
cooking compartment when empty and with the oven
door closed.
Make sure that there is no leftover packaging, such as
polystyrene pellets, in the cooking compartment and
remove the adhesive tape that is in or on the appliance.
Before heating the appliance, wipe the smooth surfaces
in the cooking compartment with a soft, wet cloth. Keep
the kitchen ventilated while the appliance is heating.
Apply the settings indicated.
You can find out how to set the type of heating and the
temperature in the next section.
Switch off the appliance after the cooking time indicated
using the On/Off button.
After the cooking compartment has cooled down, clean
the smooth surfaces with soapy water and a dish cloth.
Cleaning the accessories
Clean the accessories thoroughly using soapy water
and a dish cloth or soft brush.
1Operating the appliance
Oper at i ng t he appl i anc e
You have already learnt about the controls and how
they work. Now we will explain how to set your
appliance. You will learn about what happens when you
switch the appliance on and off, and how to select the
operating mode.
Switching the appliance on and off
Before you are able to set the appliance, you must
switch it on.
Exception: The childproof lock and the timer can be set
when the appliance is switched off.
Displays or information, e.g the residual heat indicator
in the cooking compartment, remain visible in the
display after the appliance has been switched off.
Switch off your appliance when you do not need to use
it. If no settings are applied for a long time, the
appliance switches itself off automatically.
Glass tray
For large roasts, moist cakes and bakes.
Glass tray
For bakes, vegetable dishes and baked goods.
Pull-out system, 1 level, ,Self-cleaning
The pull-out rails at level 2 allow you to pull the accessories out further
without them tipping.
Pull-out system, 2 levels, Self-cleaning
The pull-out rails at levels 2 and 3 allow you to pull the accessories out
further without them tipping.
Pull-out system, 3 levels, Self-cleaning
The pull-out rails at levels 1, 2 and 3 allow you to pull the accessories
out further without them tipping.
Decorative trims
For concealing the lower shelf of the unit and the base of the appli-
ance.
Settings
Type of heating
4D Hotair
:
Temperature maximum
Cooking time 1 hour
Operating the appliance en
13
Switching the appliance on
Use the On/Off button to switch the appliance on.
The on/off symbol above the button is illuminated in
blue.
The Siemens logo appears in the display, and then a
type of heating and a temperature.
Note: You can specify which operating modes should
appear after the appliance is switched on in the basic
settings.
Switching off the appliance
Use the On/Off button to switch off the appliance.
The lighting above the button goes out.
A set function is cancelled.
The time appears in the display.
Note: You can set whether or not the time should be
displayed when the appliance is switched off in the
basic settings.
Starting or interrupting operation
To start operation or to interrupt an operation which has
started running, press the Start/Stop button. The
cooling fan may continue to run after an operation is
interrupted.
Press the On/Off button to delete all settings.
If you open the cooking compartment door during
operation, operation is interrupted. Close the cooking
compartment door to continue operation.
Selecting an operating mode
If you want to set an operating mode, the appliance
must be switched on.
1. Press the menu button.
The operating modes menu opens.
2. Use the rotary selector to select the required
operating mode.
Depending on the operating mode, different options
are available.
3. Use the ¿ arrow to reach the required operating
mode.
4. Use the rotary selector to change the selection.
Depending on the option, change different settings.
5. Press the Start/Stop button to start.
Setting the type of heating and temperature
After the appliance is switched on, the suggested type
of heating appears with the temperature. You can start
this setting immediately with the Start/Stop button.
For other settings, you can change the values as shown
in the pictures.
Example: Top/bottom heating, 180 °C
1. Use the rotary selector to change the type of
heating.
2. Press the arrow ¿ to switch to the temperature.
3. Use the rotary selector to change the temperature.
4. Press the Start/Stop button.
The set type of heating and the temperature are
displayed in the display.
Rapid heat up
You can use the c button to heat up the cooking
compartment particularly quickly.
The rapid heat up function is not possible for all types of
heating.
Suitable types of heating:
To ensure an even cooking result, do not place your
food and the accessory in the cooking compartment
until rapid heating is complete.
Making settings
Ensure you have selected a suitable type of heating.
The temperature must be set to above 100 °C,
otherwise the rapid heat up function cannot be started.
1. Set the type of heating and temperature.
2. Press the c button.
The c symbol appears on the left next to the
temperature. The progress line begins to move across.
:
4D hot air
%
Top/bottom heating
$
7RSERWWRP
KHDWLQJ
$
7RSERWWRP
KHDWLQJ
&
PLQV
7RSERWWRP
KHDWLQJ
ꑛ
&
PLQV
7RSERWWRP
KHDWLQJ
To Next Page
Loading...
