Siemens HiPath 4000 Quick Reference

Telephone Reference Guide
SIEMENS HiPath 4000
~~- ' ..
FEATURE
HOLD
Place a caller on hold
TRANSFER
Transfer a cau
to another extension
CONSULTATION
CALL
Consult prillately with another
party then return to orK.jnal caD
CONFERENCE
CALL
Include up to 8 parties into a
conference call
BUTTON I CODE
• Press the HOLD button.
To RECONNECT:
• Press the line key of the flashing light
• Press TRANSFER (after establishing a call)
• Dial the extension number
• Announce the call
• Hang up.
To RECONNECT with original caller:
• Press blinking CONNECT button.
• Press TRANSFER to put first party on hold
• Dial the second party you wish to speak with
• Press CONNECT to return to first pa~
(CONNECT may be used to "toggle" between 1 and zn party)
• During a call, press TRANSFER
• Dial the party you want to add and wait for answer
• Press CONF or TRANSFER to join the call
If the party does not answer or does not want to join:
• Press blinking CONNECT button to rejoin your
conference call
PICK (station) • Press the PICK button (or*3)
Answer a calthatis ringing or • Dial the extension of the ringing phone or the
on hold at another phone extension where the call is holding
PICK (group) • Press the PICK button twice (or**3)
Answer
8
caH that is ringing • It is not necessary to know the extension of the
within your pickup group ringing phone
(set up by your administratrxj
LAST NUMBER • Dial##4
REDIAL (LNR)
Redial the last number dialed
5 AVE 0 NUMBER • Dial# 4 while phone is ringing- number is stored
REDIAL (SNR) To redial the saved number:
• Dial#4
Redial the last saved number
FORWARD
Temporarily~ calls to
another destinalion
SYSTEM SPEED
System 1Nid9 diredory of
~. "..._ dialed numbers
• Get dial tone on the line you wish to forward
• Press the FORWARD button (or# 91)
• Dial the forwarding target number
• Press Y" or#
(The light wiH tier next to the line you have forwarded)
To Cancel Forwarding:
• Press the FORWARD button (or## 91)
• Press#61
• Dial the index code
Note: Applicable or1ly if~ by your administrainr
OPTIGUIOE MENU
• Scroll (>) to and select" Hold?'
To RECONNECT:
• Press the line key of the flashing light
• Scroll (>) to and select "Start Transfer?'
• Dial the extension number
• Announce the call
• Hang up.
To RECONNECT with original caller.
• Scroll(>) to and select "Release and Return?'
• Select "Consult?'
• Dial the second party you wish to speak with
• Tenninate the call by selecting "Release and
Return?" or scroll(>) to and select "Toggle I
Connect?' to alternate between callers
• During a call, scroll (>) to and select '
1
Start
Conference?'
• Dial the party you want to add -wait for answer
• Select "Conference?' to join the call
If the party does not answer or does not want to
join:
• Scroll (>)to and select "Release and Return?'
• Get dial tone
• Scroll (>) to and select"Direct call pickup?'
• Dial the extension of the ringing phone or held
call
Not available
• Get dial tone and select "Last number redial?'
• During the call, scroll (>) to and select "Save
Number?'
To redial the saved number:
• Get dial tone
• Scroll(>) to and select "Saved Number
Redial?'
• Scroll (>)to and select" More Features?'
• select "Call Forwarding?' and follow prompts
To Cancel Forwarding:
• Scroll (>) to and select" View Active
Features?'
• Select "Deact Call Forwarding?'
• Scroll (>) to and select "Speed Dial Features?'
• Scroll (>)to and select" System Speed Dial?'
• Dial the index code

Siemens HiPath 4000 Specifications

General

Architecture	Modular
Supported protocols	SIP, H.323, ISDN
VoIP Support	Yes
ISDN Support	Yes
Analog Support	Yes
Integration	CTI, CRM, ERP
Compatibility	Siemens