HSAAP_Getting_Started.fm
A31003-W1110-U101-1-7619, February 2007
HiPath Wireless Standalone Access Point V1.0, Getting Started Guide
55
Getting started with a Standalone Access Point
Downloading the firmware
5. In the New Password box, type the new password.
6. In the Confirm New Password box, re-type the new password.
7. To save your changes, click Save.
5.4 Downloading the firmware
Use the Firmware/Language screen to download Standalone Access Point firmware.
To download firmware:
1. On the menu bar, click Tools.
2. In the left pane, click Firmware/Language.
3. In the Download Firmware from section, click Browse to navigate to the appropriate file.
4. Select the file to download, and then click Open in the Choose file dialog box. The
directory location is displayed in the Download Firmware from box.
5. Click Download and Reboot. The selected file is downloaded and the Standalone Access
Point is rebooted.
To Next Page
Loading...
