Siemens HiPath - Changing the Host IP Address

Getting started with a Standalone Access Point
A31003-W1110-U101-1-7619, February 2007
56 HiPath Wireless Standalone Access Point V1.0, Getting Started Guide
HSAAP_Getting_Started.fm
Changing the host IP address
5.5 Changing the host IP address
Use the LAN screen to change the IP address for the Standalone Access Point.
To change the host IP address:
1. On the menu bar, click Configuration. The LAN screen is displayed.
2. In the IP Address box, type the static IP address. The default is 192.168.1.20.
3. To save your changes, click Save.
>
The Standalone Access Point will automatically reboot using the new
downloaded firmware version.
>
The Reboot button is available on this screen.