Siemens HS736G3 1 Series User Manual

en Steaming
16
a Once the cooking time has elapsed, a signal tone
sounds. A note appears on the display confirming
that the operation has finished.
6.
Once the cooking time has elapsed:
‒ If required, you can select other settings and re-
start the operation.
‒ When the food is ready, use to switch the ap-
pliance off.
Changing the cooking time
You can change the cooking time at any time.
1.
Press the cooking time.
2.
Change the cooking time using or , or directly
via the adjustment bar.
3.
Press "Apply".
Cancelling the cooking time
You can cancel the cooking time at any time.
1.
Press the cooking time.
2.
Reset the cooking time using ⁠.
Note:For operating modes that always require a
cooking time, the appliance resets the cooking time
to the preset value.
3.
Press "Apply".
10.2 Setting the end time
You can delay the time at which the cooking time for
the operation is due to end by up to 24 hours.
Requirements
¡ An operating mode and temperature or level have
been set.
¡ A cooking time is set.
1.
Press "End time".
2.
Use or to delay the time or enter the time dir-
ectly via the number field ⁠.
If required, use to reset the setting value.
3.
Press "Apply".
4.
Press to start the operation.
a The display shows the start time. The appliance is in
standby mode.
a Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down.
a When the time has elapsed, a signal sounds. A
message appears on the display confirming that the
operation has finished.
5.
Once the cooking time has elapsed:
‒ If required, you can select other settings and re-
start the operation.
‒ When the food is ready, use to switch the ap-
pliance off.
Setting the end time
To achieve good cooking results, only change the set
time before the operation starts and before the cooking
time starts counting down.
1.
Press "End time".
2.
Use or to change the time or enter the time dir-
ectly via the number field ⁠.
3.
Press "Apply".
Cancelling the end time
You can delete the set time at any time.
1.
Press "Stop"
2.
Press "End time"
3.
Use to reset the time.
Note:For operating modes that always require a
cooking time, the appliance resets the time at which
the cooking time ends to the next possible time.
4.
Press "Start"
10.3 Setting the timer
The timer runs independently during the operation. You
can set the timer when the appliance is switched on or
off, up to 24hours. The timer has its own signal so that
you can tell whether it is the timer or a cooking time
that has elapsed.
1.
Press the button.
2.
To set the timer, press the relevant time value on
the display, e.g. hour display "h" or minute display
"min".
a The selected value is marked in blue.
3.
Set the timer using the number field.
If required, use to reset the setting value.
4.
Press "Start" to start the timer.
a The timer counts down.
a The timer remains visible on the display if the appli-
ance is switched off.
a When the appliance is switched on, the display
shows the settings for the current operation. The
timer is displayed in the status bar.
a Once the timer has elapsed, a signal sounds. A no-
tification appears on the display confirming that the
timer has finished.
Changing the timer
You can change the timer at any time.
1.
Press the button.
2.
Press "Stop".
3.
Change the timer.
4.
Press "Start".
Cancelling the timer
1.
Press the button.
2.
Press "Stop"
3.
Reset the timer using .Reset the timer using .
4.
Press ⁠.
Steaming
11 Steaming
Food can be cooked particularly gently using steam.
You can use the special types of steam heating, or use
steam assistance with certain types of heating.

Siemens HS736G3 1 Series Specifications

General

Brand	Siemens
Model	HS736G3 1 Series
Category	Oven
Language	English