EasyManua.ls Logo

Siemens iQ500 MB535A0 0B Series - 4.5.2 Self-cleaning surfaces; 4.5.3 Lighting; 4.5.4 Cooling fan; 4.5.5 Appliance door

Siemens iQ500 MB535A0 0B Series
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Accessories en
9
Self-cleaning surfaces
The self-cleaning surfaces in the cooking compartment are coated with a porous, matt ceramic layer and have a
rough surface. When the appliance is in operation, the self-cleaning surfaces absorb splashes from roasting or
grilling and break them down.
The following surfaces are self-cleaning:
Cooking compart-
ment
Self-cleaning sur-
faces
Cleaning
Main cooking
compartment ⁠
Back wall If the self-cleaning surfaces no longer clean themselves adequately
during operation, heat up the cooking compartment specifically to
the right temperature.
Top cooking
compartment ⁠
¡ Back wall
¡ Ceiling
¡ Side walls
Use the cleaning function regularly to help retain the cleaning ability
of the self-cleaning surfaces and prevent damage.
→"Cleaning function ", Page18
Lighting
The oven lamp lights up the cooking compartment.
With most types of heating and functions, the lighting
lights up during operation. When the function selector
is turned to bring operation to an end, the lighting goes
out.
The Oven light setting on the function selector can be
used to switch on the light without heating.
Note:The cooling fan also runs at position Oven light.
Cooling fan
The cooling fan switches on automatically during oper-
ation. The hot air escapes above the door.
ATTENTION!
Do not cover the ventilation slot above the appliance
door. The appliance overheats.
Ensure that the ventilation slots are unobstructed.
To ensure that the appliance cools down more quickly
after operation, the cooling fan continues to run for a
certain period afterwards.
Appliance door
If you open the appliance door during operation, the
operation continues.
5  Accessories
Use original accessories. These have been made espe-
cially for your appliance.
Note:Accessories may become deformed if they get
hot. Deformation has no effect on function. As the ac-
cessory cools down, it will regain its original shape.
The accessories supplied may differ depending on the
appliance model.
Accessories Use
Wire rack ¡ Cake tins
¡ Ovenproof dishes
¡ Cookware
¡ Meat, e.g. roasting joints or steak
¡ Frozen meals
Universal pan ¡ Moist cakes
¡ Baked items
¡ Bread
¡ Large roasts
¡ Frozen meals
¡ Catching dripping liquids, e.g. fat when
grilling food on the wire rack.
5.1 Locking function
The locking function prevents the accessories from tilt-
ing when they are pulled out.
You can pull out the accessories approximately halfway
without them tipping. The accessories must be inserted
into the cooking compartment correctly for the tilt pro-
tection to work properly.
5.2 Sliding accessories into the cooking
compartment
Always slide accessories into the cooking compartment
correctly. This is the only way to ensure that accessor-
ies can be pulled out approximately halfway without tip-
ping.
1.
Turn the accessories so that the notch ⁠ is at the
rear and is facing downwards.

Table of Contents

Related product manuals