Siemens iQ500 TP5 Series

Basic settings en
59
Tips
¡ You can activate and deactivate the
cup heater in the basic settings.
→"Overview of the basic settings",
Page59
¡ Place the cups with their base on
the cup heater to heat the cups per-
fectly.
Basic settings
You can configure your appliance to meet your needs and call up additional func-
tions.
Overview of the basic settings
Setting Selection Description
Cleaning and care Milk system
Descale
Clean
calc'nClean
Start service programme.
→"Service programmes",
Page63
Cup warmer
1
Cup warmer off
2
Cup warmer on
Switch cup heater on or off.
→"Cup heater", Page58
Water filter New filter
No filter
Set use of the water filter.
Coffee temp. normal
high
max.
Set the temperature for coffee
drinks.
Note:The setting is effective for
all preparation types.
Languages See options on the appliance. Set menu language.
Changes are immediately dis-
played.
Autom. switch-off See options on the appliance. Set how long the appliance
should wait after preparing the
last drink before automatically
switching itself off.
Water hardness 1 (soft)
2 (medium)
3 (hard)
4 (very hard)
2
Water-softening system
Set the appliance to the local wa-
ter hardness.
→"Setting the water hardness",
Page52
Key tones Key tones on
2
Key tones off
Switch the button tones on or off.
1
Depending on the appliance specifications
2
Factory setting (may vary according to model)