Siemens LOGO! CSM 12/24 - Customizing Warning Messages and Alarm Classes

4 Installation and Commissioning
House Control and Weather Sensors - LOGO! Set 11
Entry ID: 68585346, V2.1, 09/2018
25
 Siemens AG 2018 All rights reserved
No.
Action/response
WinCC Basic
5.
You can display a value in the
warning message text (here,
e.g., the wind speed):
1. Double-click on one of the
warning messages to open
the text editing mode.
2. Now go to the place in the
text where you would like
to display a value.
3. Open the context menu
with a right click and select
the menu item "Insert tag
field”.
6.
Now select the tag you would
like to display in the text and
specify the number of digits to
be displayed in the message.
Then click on the green
checkmark to close the
window.
7.
Now, go to the "Alarm classes”
tab. Here you can assign user-
defined names to the individual
warning messages.
In addition, you can define the
background color of the
warning message.
8.
Under "Screen management”,
go to "Global screen” and open
it with a double click.