38
gsm-m1-e.fm
GSM M1 Module, English: A24859-N4000-A100-1-7677
Technical reference section
26.2.96
Evaluate the result code using the following table:
Example:
Enter: AT+COPS=?
GSM module: +COPS: (2, “ D1 TELEKOM “, “26201“),
+COPS: (3, “ D2 PRIVAT “, “26202“)
OK
This command allows you to select a network operator manually or to activate the auto-
matic selection of a network operator. It is recommended that you first display a list of
available network operators.
Example:
Enter: AT+COPS=0 The M1 automatically searches for a operator.
M1: OK
Enter: AT+COPS=1, 2, “26201“
GSM module: OK
<+COPS status n> n= [0..3]
STATUS n Meaning Explanation
0 Unknown Status unknown
1 Available Network operator is available.
2 Current This network operator is the one currently in use.
3 Forbidden This network operator is forbidden.
Operator Network
operator
Displays the network operator in text format and
numeric format.
AT+COPS= .., .. - Use this network operator
AT+COPS= <mode n>, <format f>, <operator>
Mode n Mode n specifies how the new network operator is to be selected.
The meaning is the same as for the AT+COPS? read command.
Format f <format f> specifies the format to be used for displaying the operator.
The GSM M1 supports only the numeric format for selection.
Operator The network operator to be used (numeric format).
To Next Page
Loading...
