Siemens M1 - AT+CKPD - Keypad Control

43
GSM M1 Module, English: A24859-N4000-A100-1-7677
gsm-m1-e.fm
Technical reference section
6.3.96
This command allows you to simulate keystrokes on the GSM mobile telephone. Input
corresponds to the actuation of keys on the Siemens S3COM.
Example:
You would like to enter the key combination “*#06#“:
Enter: AT+CKPD=*#06#
GSM module: OK
AT+CKPD - Keypad control
AT+CKPD
Command Result
AT+CKPD=<key> Instructs the GSM module to simulate the key <key>.
AT+CKPD=? Displays a list of keys that are supported.
AT+CKPD=?
Command AT+CKPD=?
Result code +CKPD: “0123456789*#CDEISUXYZ[]“
<key> Meaning of the keys
0-9, *,# Key 0 - 9, “*“, “#“
“C“ or “c“ Clears the display.
“E“ or “e“ Simulates the End key.
“I“ or “i“ Simulates the Info key.
“S“ or “s“ Simulates the Start key.
“X“ or “x“ Phonebook key
“Y“ or “y“ Deletes the last character.
“Z“ or “z“ Exits menu.
[ Simulates the left softkey.
] Simulates the right softkey.