52
gsm-m1-e.fm
GSM M1 Module, English: A24859-N4000-A100-1-7677
Technical reference section
26.2.96
This command refers to the GSM supplementary service CLIP (Calling Line Identifica-
tion Presentation) that enables a called subscriber to get the calling line identity (CLI)
when receiving a call.
The set command + CMP=<n> enables or disables the presentation of the CLI at the
M1. It has no effect on the execution of the service CLIP in the network. When enabled
+CLIP: <number>,<type> response is returned after every RING result code.
The read command +CLIP? gives the status of mode n and also triggers an interroga-
tion of the provision status of CLIP in the network.
AT+CLIP - Calling line identification presentation
AT+CLIP
Command Result
AT+CLIP? Displays mode n, mode m
AT+CLIP=? Displays a list of supported modes n
AT+CLIP=<mode n> Selects new mode
AT+CLIP?
Command AT+CLIP?
Result Code +CLIP: <mode n>,<mode m>
<mode n> n=[0,1]
1 enables extendet format
0 disables extendet format
<mode m> m=[0,1,2]
0 CLIP not provisioned
1 CLIP provisioned
2 unknown
To Next Page
Loading...
