Introduction – products concept
7
Building Technologies 049_DMS_DMS8000_Application_Specification_Planning_MP4.81_A6V10063710_a_en.doc
CPS Fire Safety 09.2016
Current version Date Notes
- NK823x Web Server for monitoring and configuration
- FTP passive mode supported
A6V10063710_a_en 06.2013 14
th
Application & Planning edition for all Siemens DMS, Net-
work, and 3
rd
party products (MP4.60)
Updates include:
– XLS panel support by MK8000
– NK823x:
– SD card supporting memory expansion for logging storage
– STT20 BACnet connectivity support
– Support of large Sinteso (Cerberus PRO)/STT20 systems
– Enhanced firewall support (Edge FW Advanced)
– BACnet/IP connectivity limitations
– NK8235: Up to 32 Modbus panels supported on RS485
A6V10063710_a_en 06.2012 13
th
Application & Planning edition for all Siemens DMS, Net-
work, and 3
rd
party products (MP4.50)
Updates include:
– NK823x:
– Dual Ethernet interface supporting redundancy and net-
work separation; also routing and firewall functions
– USB port supporting memory expansion for logging storage
– Modbus Gateway for multiple Modbus clients, devices
– Support of two upstream CEI 79-5 hosts
– STT20 BACnet connectivity support by MM8000/MK8000
– Enhanced Bosch video device support
– ONVIF-compliant camera support
– Architectural drawing updates according to new MM8000 UI
– MT8001 Management Terminal phased out
– Siemens Building Technologies now in Siemens Infrastruc-
ture and Cities Sector
A6V10063710_a_en 06.2011 12
th
Application & Planning edition for all Siemens DMS, Net-
work, and 3
rd
party products (MP4.40)
Updates include:
– New Bosch video subsystem support (MM8000)
– 3
rd
party generic DVR support via OPC (MM8000)
– Support for up to 15 clients (MM8000 / MK8000)
– NK823x support of FS20/FS720
– NK823x acts as FS20/FS720 Modbus Gateway for 3
rd
party
Modbus stations/devices
– New NK8237 Modbus Gateway
– New application port number for NK823x secure download
– SNMP support (NK823x only)
A6V10063710_b_en 12.2010 11
th
Application & Planning edition for all Siemens DMS, Net-
work, and 3
rd
party products (MP4.30-01)
Updates include:
– Documentation pertaining to NK823x product enhancements
MP4.30-01
– Documentation pertaining to MM8000/MK8000 product en-
hancements MP4.30-01
A6V10063710_a_en 06.2010 10
th
Application & Planning edition for all Siemens DMS, Net-
work, and 3
rd
party products (MP4.30)
Updates include:
– MM8000 multiple server support
– NK823x dual Ethernet interface for redundant networking
– NK823x onboard digital I/Os
– NK823x support of CS115/FC330A
– NK822x remote tunnelling for CS6 Guarto
– Management level configurations section content enhanced
and restructured
– Illustration updates
A6V10063710_b_en 12.2009 9
th
Application & Planning edition for all Siemens DMS, Network,
and 3
rd
party products (MP4.20-01)
Updates include:
– Documentation pertaining to release of NK823x products
MP4.20-01