Maintenance and diagnostics
The NW8204 diagnostic tool
9.3.3 Diagnostic functions
Reset NK
Reset an NK8000 from a remote location.
Note: This function is only available when logged in as user “admin”.
Save EEProm on file
Store the content of the EEPROM in the EEProm.LOG file on the NK8000 flash
disk.
Set System Time
Set the RTC (Real Time Clock) of NK8000 to PC system time.
Note: This function is only available when logged in as user “admin”.
Set Date Time
Open a window for setting date and time and downloads the new settings to the
NK8000RTC.
Note: This function is only available when logged in as user “admin”.
Setting date and time
NK Vitality
Open a window which displays the current status of the NK8000 point image.
NW8204 Vitality window
The window can be updated manually by clicking the Refresh button.
You can use it to check if the status changes are sent correctly from NK8000 (for
example, from the tamper switch).
Read DLL Version
To Next Page
Loading...
