Siemens NK8232

Software installation
NW8204 maintenance and diagnostic tool
6
55
Building Technologies
A6V10062437_a_en
Fire Safety & Security Products 30.06.2013
6.4.1 NW8202 hardware requirements
 Pentium-class PC hardware or higher
 Ethernet network interface adapter (IEEE 802.3, 10Base-T or 100Base-TX)
 10 MB Free Disk Space
 128 MB RAM (recommended)
6.4.2 NW8202 software requirements
 Windows XP Professional or higher operating system
 Network Configuration including TCP/IP protocol
6.4.3 NW8202 installation
You can install the NW8202 tool when you install the DMS. You can also install it
separately on a different PC (such as a service PC) at a later time.
On a DMS8000 system, you launch NW8202 by selecting the NW8202.exe file from
the following directory:
<InstallationDir> > Utilities > NW8202
with the default installation folder being: C:\Program files\DMS8000 (assuming an
English version of Windows).
To install the NW8202 tool on a service PC, do the following:
1. Logon to computer as Administrator (for details ask network administrator).
2. Insert the DMS8000 DVD.
3. Select the Support Tools option.
4. Select Install NW8202.exe.
 Install Shield Wizard opens.
5. Follow the instructions in the installation wizard.
6.5 NW8204 maintenance and diagnostic tool
The NW8204 is a powerful maintenance and diagnostic tool, which provides
functionalities for (but not limited to) the following:
 Downloading firmware
 Setting IP addresses
 Loading default configurations
 Using available diagnostic files
Note: Part of the NW8204 tool is available in Composer (limited functionality).
For details, see the
Network Connectivity Guide (document no.A6V10359485).